[:en]The cut leaves of the leaves are very beautiful. Many people like to cultivate the piano leaves at home. It can even grow into a big tree. The locust leaf is a plant suitable for cutting propagation, and the cutting method is very simple. During the cutting process, you can successfully copy the harp leaves by paying attention to some things. Let’s talk about the method that can be cut and cut.
1. When can I choose the cutting method? You can easily breed the leafhopper by cutting part of the stem, leaf or root.
It is best to breed in spring and summer, when temperature and humidity are very suitable for it to grow.
When cutting the leaves, it is best to control the temperature between 20-30 degrees. This is for the roots of the leaves to be fast, and the humidity is preferably controlled between 70-80%, which is also the need for rooting.
Qin Ye has a strong ability to adapt to light. It can grow very well in the case of astigmatism, but glare should be avoided.
2. When cutting, you can choose leaves, stems or roots. First, cut off a few leaves of the leaves. The lower part of the leaf stem should be chamfered to increase the water absorption area. If there are stems on the leaves, they should be cut horizontally to reduce evaporation of water. . Prepare a large container, add water, add a few pieces of aspirin to dissolve, and mix well.
The leaves are then immersed in water and the incisions on the stems of the leaves are sterilized. Then cover the lid and use a clear plastic bag to place the leaves in a well-lit area for a week or so to grow.
Next, the rooted leaves should be planted in pots, because the leaves grow very fast, you can choose a large flower pot.
3. Peat and perlite or river sand can be used as soil in flower pots. To avoid glare, some leaves can be removed to avoid evaporation of water. This soil has good water permeability and is very suitable for root growth of the leaves.
During root growth, care should be taken to keep the soil moist. There should be no water in the pot, but water should be sprayed on the surface to ensure humidity.
4. When cultivating, pay attention to the ventilation of the environment and the cool leaves of the leaves. Scattered light is suitable. Under normal temperature and humidity conditions, the leaves will grow out in about a month. According to the growth state of the locust, the appropriate trimming can be performed.
The leaves can be cut. It is now obvious that in addition to cuttings, the leaves can also be propagated through layers. But cutting is easier and more fun.
The leaves can be cut. The answer is certainly yes. In the process of cutting, you may wish to refer to some of the precautions described above, so that the success rate of the cuttings will be higher.[:zh]切割的葉子琴葉榕非常漂亮。許多人喜歡耕作琴葉榕在家。它甚至可以長成壹棵大樹。琴葉榕是壹種適合扡插繁殖的植物，扡插方法非常簡單。在切割過程中，妳可以通過註意壹些事情成功地復制豎琴的葉子。讓我們來談談琴葉榕可以切割，切割的方法是什麽琴葉榕。
1.什麽時候可以選擇扡插方式琴葉榕正在傳播。妳可以很容易地通過切割部分莖、葉或根來繁殖琴葉榕。
琴葉榕最好在春天和夏天繁殖，那時溫度和濕度非常適合它生長。
切割時琴葉榕，最好將溫度控制在20-30度之間，這是為了琴葉榕生根快，濕度最好控制在70-80%之間，這也是生根的需要。
琴葉榕有很強的適應光的能力。散光情況下它能長得很好，但應避免強光。
2 .切割時可以選擇葉、莖或根琴葉榕。首先，剪掉幾片葉子琴葉榕。葉莖的下部應該斜切以增加吸水面積。如果葉子上有莖，應該水平切割以減少水分蒸發。。準備壹個大容器，加水，加入幾片阿司匹林溶解，攪拌均勻。
然後將葉子浸泡在水中，對葉子莖上的切口進行消毒。然後蓋上蓋子琴葉榕用透明塑料袋把葉子放在光照充足的地方壹周左右，以便長出根。
接下來，帶根的葉子應該種在花盆裏，因為琴葉榕長得很快，妳可以選擇壹個大花盆。
3.泥炭和珍珠巖或河沙可以用作花盆中的土壤。為了避免強光，壹些葉子可以被移走以避免水分蒸發。這種土壤透水性好，非常適合琴葉榕根系生長。
在根系生長過程中，應註意保持土壤濕潤。花盆裏不應該有積水，但是應該把水噴灑在表面以保證濕度。
4 .繁殖時應註意環境的通風和陰涼琴葉榕。散射光是合適的。在正常的溫度和濕度條件下，琴葉榕大約壹個月就能長出根來。根據的生長狀態琴葉榕，可以進行適當的修剪。
琴葉榕可以被切割。現在很明顯琴葉榕除扡插外，還可通過分層繁殖。但是切割更簡單也更有趣。
琴葉榕可以被切割。答案當然是肯定的。在扡插過程中，琴葉榕希望妳能參考上面介紹的壹些註意事項，這樣扡插的成功率琴葉榕會更高。[:]